Brush and Tree Debris Removal: everything you need to know

Small amounts of brush can be removed and disposed of in green trash containers, but large amounts of brush cannot be removed and disposed of in these containers. It is best to assess a plan for brush clearance and removal if you are clearing and removing a sizable amount of brush or currently have a pile in your yard.

Table of Contents

How Do I Get Rid of a Lot of Brush?

Upkeep and maintenance for a tiny residential property with tame turf are not too difficult. However, maintaining a brush can be difficult if you have a larger plot with some natural areas. Without a doubt, cleaning brush is a really difficult task, regardless of how densely grown the lot is or even if it only needs little pruning. As a result, consulting an expert is always recommended. But, if you still wish to do the job by yourself, then we have got the best tips for brush removal near Raleigh, NC, and nearby regions. So, without further ado, let’s start!

What is Brush? Why Should You Clear It?

Simply put, a brush can be defined as woody vegetation, such as tree limbs, branches, dead or nuisance-causing bushes, trees, and shrubs, along with vines and stumps. Besides, brushes also include invasive or unwanted live plants and debris. The main distinguishing feature of the brush is that it crowds out desirable plants and flowers, and can be attractive to snakes, rodents, and pests. Thus, the brush is a safety hazard and restricts a property’s inhabitants’ ability to fully enjoy their outdoor spaces!

Best Time for Brush Removal

Winter is the best time for brush and tree debris removal near Clayton, NC, and the proximal regions. It is significantly simpler to rake, prune, hoe, and trim vegetation in the winter since it is organically less dense. Additionally, working on the frozen ground has no negative effects on the neighboring healthy and desirable plants and causes no soil disturbance. Additionally, it is ideal to remove bush in the winter when it is less likely that you may encounter snakes or get bitten by mosquitoes or other insects.

A Seven-step Guide to Brush Removal and Tree Debris Removal

  • Invigilate the Landscape

When planning on clearing your lawn for landscaping or constructing a new structure, you will know precisely what you are dealing with. But, of course, the process requires rigorous invigilation of the landscape and then laying out what needs to be done. Of course, you do not need a map of the lawn, but you do need to navigate the yard and gauge the best possible way to clear and brush and undergrowth. Also, make sure to mark the unwanted trees in the lot, and note areas that appear particularly thick and overgrown.

It is also a good idea to demarcate spots of the lawn or yard, which might be tenuous and tough to work on, such as swampy or rocky terrains. For example, if your priority is tree removal, then you have to determine if the trees are large or small. Do they have a lot of foliage and branches? How tall are they? What is the height, diameter, and girth of the trees, and what is the debris you will accumulate after the trees are uprooted?

The quantity of material and the size of the trims will determine the best way to remove the brush whether you are removing grasses, shrubs, and undergrowth, or if there is a large pile of vines that has to be removed. For instance, if there is a significant amount of debris, you should not rely on garbage pickup and instead rent a roll-off dumpster for the brush removal operation. Therefore, the key is to customize the brush removal plan to meet both your needs and the specifications of the lot.

  • Lay Down a Plan for Brush Disposal

Before you begin the brush and tree debris removal near Clayton, NC, and nearby areas, it is a good idea to come up with a plan of action for appropriate brush disposal. Otherwise, there is a big possibility that you will end up with a lot of excess in your yard, which can create a fire hazard. Moreover, a very large pile of brush can also be a safe haven, snakes, rodents, ticks, and fleas. The three possibilities for brush clearance include –

  • Dumpster hiring:

After removing the brush from the landscape, you should usually clean it up by moving the waste to a dumpster that you have leased. The advice is particularly useful if you have a lot of large pieces of waste to get rid of, like trucks and tree limbs. However, there are countless more things you can throw away in a trash, like grass clippings, shrubs, and vines.

  • Opt for on-site Brush Grinding

If the lot you are clearing is large enough to accommodate a grinder, then it can be an excellent option to mitigate the footprint of the material and make a product that is much more advantageous for the landscape. Once the brush is ground up, it biomes mulch, which has a plethora of garden-oriented uses.

Mulch can be used in a variety of ways, such as to cover existing garden beds, discourage weeds from growing, preserve moisture, keep walkways free of mud, protect tree roots, and more. Mulch is a very appealing addition to the landscape and is simple to utilize on any type of property.

  • Create Mulch-based Compost

Lastly, if you do not prefer to keep the mulch made from your brush on-site, there is always the alternative of hauling it away and using the mulch to make compost and soil blends. Thus, you get organic matter, which is sustainably recycled and kept out of the landfill.

Equipment for Brush Removal

Before delving into the process of clearing brush from your lot, make sure to have proper and adequate equipment in hand. Remember to use tools and equipment that are serviced and properly working. Brush removal is an arduous and risky process, and vigilance is imperative. Some of the things that can assist you in seamlessly clearing brush from the lot, while staying safe are –

  • Work gloves
  • Sturdy boots
  • Thick pants
  • Long-sleeved shirt
  • Protective goggles
  • Ear protection
  • Insect repellant
  • Machete
  • Pruners
  • Loppers
  • Weed Wacker
  • Chainsaw
  • Shovel
  • Lawnmower
  • Chipper or Shredder (In case, those who want to use leaves and twigs to make their own onsite mulch)

Cutting Down Trees

After marking down the trees you want to cut during the prep section, it is now time to get down to business. The key is to remember that any brush and tree debris removal near Clayton, NC, or nearby areas must begin with removing the trees. Uprooting small trees is simple, and can be easily done at home. However, you must be extra careful while dealing with medium and large size trees, as they can be difficult to take out without proper equipment or professional help. The steps to cut down a small tree are –

  • Demarcate the trunk around a foot above the ground
  • Chop at a 45-degree angle, using either an ax or chainsaw until about a third of the way through the trunk. You have to make sure that you are cutting into the side that you would like the tree to fall forward.
  • Cut a 45-degree wedge on the other side of the tree, at a spot that is a rad bit higher than your cut on the opposite side. This cut should go about halfway through the trunk.
  • Push the tree trunk from the side where the second cut was made. If the tree does not fall, use the bow saw to continue your cut until the tree starts to fall.
  • Repeat steps 1 to 4, as and when required for the trees you want to remove.

After cutting down the small tree, you also have to remove the stump to completely clear the land of brush. Some of the ways to remove tree stumps are –

  • To remove the small stump, use a shovel; the technique only works on smaller stumps with a shallow root system. The two crucial steps are digging to expose the roots and removing the stump with an axe or pruning shears. The stump needs to be removed from the ground at the following stage.
  • You can also opt for a stump grinder to dispose of and discard the stumps. The technique is quite compatible with small stumps that have a more stubborn root system to medium and large stumps with a shallow root system. You can easily rent stump grinders at a per-hour rate from your local home improvement store.

Shrub Removal

The fifth step of brush removal near Raleigh, NC, is removing the shrubs. As the trees are cut, obviously, the next step is to get rid of medium to large-sized shrubs. Depending on their size, you can remove some shrubs by hand, while others would mandate a shovel to dig out the roots. Moreover, it can also help to prune back some of the smaller branches or sections of the shrub to make the digging process easier.

Eradicate the Undergrowth

After the trees and shrubs are gone, you have to get into the thick of things. Now, tall grass, weed, small shrubbery, and vines are the elements that you need to take care of. Some of the things you would need to remove them include a trimmer, scythe, machete, and a tree pruner. The heavier vines and brambles must be pruned with a pruner and thrown to the side in order to get rid of vines and weedy bushes. Next, remove any larger weeds from their roots.

Trim the Remaining Elements

The seventh step of brush removal near Raleigh, NC, and nearby regions is simple and straightforward. After clearing the dense thick vegetation, you have to take out the string trimmer or scythe and remove the minor undergrowth inundating the area. The key is to cut the remaining vegetation as close to the ground as possible. If the overgrowth is especially high, the key is to cut down about halfway on a first pass, and then trim it to the ground on a second pass. In case the brush you need to trim the vegetation is particular, you can also use a lawnmower.

Tips for A-1 Brush Removal

  • When performing brush removal on any landscape, it is optimal to start with the larger elements and then work your way down to the smaller vegetation. Thus, you have to cut or trim larger trees first, then move on to the smaller trees, and finally to shrubs and perennials.
  • If your priority is to completely clear land, then it is essential to eradicate the stumps. For small stumps with a shallow root system, a shovel should be enough. For larger trees with stubborn root systems, you would need a stump grinder.
  • The last type of plants in the process of brush and tree debris removal near Clayton, NC, and nearby regions are vines, grasses, shrubs, weeds, and other foliage. Although they are easy to remove, the task can be physically exhausting. Besides, you would need tools like pruners, loopers, lawnmowers, etc. It is also advisable to get the blades of the tools sharpened for cleaner cuts and easier work.

Trees are the heart and soul of a property. With the right care, they can last for years on end. But, they are not indomitable. Violent storms and other weather-related upheavals can easily knock over even the strongest trees. If your property needs trees, shrubs, and other vegetation to be removed and disposed of, Pippin Tree Service can help. They have been performing arboreal tasks, such as brush removal and tree removal for decades in Clayton, and Raleigh regions of North Carolina for decades. Rather than taking the risky route of brush removal and tree cutting at home, it is best to call a professional team like Pippin Tree Service.

tree debris removal